Outer Web | Explore

Explore >> Select a destination

You are here		tbspace.de Es'hail-2 transceiver setup \| KittenLabs
\|	\|	kaspars.net Use Aqara G2H Zigbee Camera Hub with Home Assistant (Electronics, Home Automation) - Kaspars Dambis	18.7 parsecs away Travel
\|	\|	Aqara G2H (ZNSXJ12LM) is a really nice Zigbee hub and indoor camera with official HomeKit support. Of course it runs Linux so people have discovered ways to connect it to Home Assistant which exposes most of your HomeKit devices to Home Assistant over MQTT without impacting the original Apple Home and Aqara app integrations. Aqara...	18.7 parsecs away Travel
\|	\|	irq5.io Setting Up a Zigbee Sensor Network « irq5.io	10.5 parsecs away Travel
\|	\|	The advantage of Zigbee devices is that they are very low power, and they communicate in a wireless mesh network. The sensors are small and can work off a CR2032 coin cell for at least 2 years, maybe more. Depending on the type of sensor, they cost around US$10 and are readily available from various...	10.5 parsecs away Travel
\|	\|	uhf-satcom.com Es'hail-2 Oscar 100 Dual Band Patch Antenna \| UHF-Satcom	11.2 parsecs away Travel
\|	\|	Simple dual band dish feed for Es'hail-2 / QO-100 Mike Willis G0MJW, Remco den Besten PA3FYM, Paul Marsh M0EYT February 2019 Abs...	11.2 parsecs away Travel
\|	\|	imrannazar.com Let's Build a JPEG Decoder: File Structure - Imran Nazar	89.9 parsecs away Travel
\|		Aside from the concepts explored in the previous part of this series, the JPEG file format is composed of segments which encode the various portions of information needed to decode an image. This article implements a simple method of traversing the segments of a JPEG file.	89.9 parsecs away Travel