Explore >> Select a destination
|
You are here 
|
irq5.io | ||
| | | | |
kaspars.net
|
|
| | | | | Aqara G2H (ZNSXJ12LM) is a really nice Zigbee hub and indoor camera with official HomeKit support. Of course it runs Linux so people have discovered ways to connect it to Home Assistant which exposes most of your HomeKit devices to Home Assistant over MQTT without impacting the original Apple Home and Aqara app integrations. Aqara... | |
| | | | |
blog.michal.pawlik.dev
|
|
| | | | | This is a second post in the Smart Home series. See the previous post if you haven't already: https://blog.michal.pawlik.dev/posts/smarthome/smart-home-getting-started/. Last time we have set up the HA (Home Assistant), in this post we'll learn about Zigbee and control some devices. Zigbee Zigbee is a specification for wireless communication protocols, very common solution for building home automation networks. Explaining new terms is always easier when there's something well known you can relate to, so before describing Zigbee let's recall something familiar, the typical WiFi network. | |
| | | | |
blog.atx.name
|
|
| | | | | atx - My personal blog | |
| | | | |
www.codeandunicorns.com
|
|
| | | Explanation on setup I finally got the LCD LED controller. I spent some time to understand a bit better how it works. So basically from the LCD controller there is a connector with red/yellow/black lines going to driver board, which is needed for this old types of LCD monitors. | ||
