/explore
|
You are here 
|
www.eliseomartelli.it | ||
| | | | |
techblog.jeppson.org
I have an old dry contact garage door opener. I've wired it to a nifty ratgdo device to control it with Home Assistant. I ran into an issue with wiring reed switches to report the garage door state (open / closed.) The wires carrying the data would pick up RFI that made my remotes stop ... Continue reading Report proper RATGDO door state in home assistant |
|
| | | | | ||
| | | | |
www.cavelab.dev
Earlier this year I put up a Raspberry Pi powered DAKboard display. It shows photos from our Google Photos albums, the time and weather, and most importantly; our shared calendar. But I'd like it to show some custom data as well - like indoor temperature and humidity. And the measured outdoor temperature, not just the one reported from the weather service. Here is how I did that - using Home Assistant |
|
| | | | | ||
| | | | |
saeedesmaili.com
I've been using Home Assistant to control many things at my smart home, including a couple of lights which are toggled on and off with motion sensors. I have one of these in the bathroom, so the motion sensor detects when I enter the bathroom and its light turns on, and the light turns back off if the motion sensor doesn't detect any motion in a specific period (60 seconds). Setting this automation is very easy using the motion-activated light blueprint , you just need to choose the entities for the motion sensor and the light, and Home Assistant handles all the hassle of figuring out the logic for when to turn the light on or off, and what to do when a motion is detected in the cool off period. |
|
| | | | | ||
| | | | |
geekken.blog
1 post published by Geek Ken on November 11, 2022 |
|
| | | |||
