/explore
|
You are here 
|
www.theenglishwoodworker.com | ||
| | | | |
theapartmentwoodworker.com
|
|
| | | | | When last we spoke, I was walking through my process for laying out and cutting angled, rectilinear mortises through a slab top to make low benches and other staked leg furniture without the need for large boring bits and round tenon cutters. At the end, I promised to discuss my process for cutting the tenons,... | |
| | | | |
boat.karlnelson.net
|
|
| | | | | The next big task I had was to drill two holes into the front (and back) of the benchtop in front of each leg. The holes are for the drawbores (pegs) that help keep the whole thing together. I once again used my drill guide, only this time clamped to the side of the top, and propped up with some scrap wood. This method worked pretty well. (We're going to ignore the holes for one of the back legs that are slightly askew. | |
| | | | |
cagrimmett.com
|
|
| | | | | Step two of the workshop upgrade. Previously: Insulating and heating my workshop with a diesel heater Research and design The workshop is a small 10×14? space, so I needed to be very int... | |
| | | | |
alex.kirk.at
|
|
| | | [AI summary] A blog post discussing a presentation's slides and related comments from various individuals. | ||
