Explore >> Select a destination
|
You are here 
|
debugmo.de | ||
| | | | |
iosoft.blog
|
|
| | | | | Analog signal capture at 60 megasamples per second This project provides a simple way of capturing data using a Pi PicoW, and displaying it wirelessly on a Web browser, as either as a logic analyser, or an oscilloscope. The digital capture is done using the Pico I/O lines; the analogue capture uses an AD9226 parallel... | |
| | | | |
blog.jchw.io
|
|
| | | | | A blog about software. | |
| | | | |
ciesie.com
|
|
| | | | | You programmed STM32 microcontroller using Nucleo or Discovery boards. That means you used Serial Wire Debug (SWD) for programming/debugging. Now, you are designing a PCB with a STM32 microcontroller on it, which means you have to be able to program it. One solution is uploading the code through a bootloader - a small piece of software, made by ST that has been saved in the protected (read-only) memory of the microcontroller. | |
| | | | |
jborza.com
|
|
| | | Over a month ago I bought an Altera Cyclone IV board from a local seller, it seems to be listed on Aliexpress as well. Its marked as A-C4E6E10, and features: Altera Cyclone IV EP4CE6E22C8 FPGA chip with 6272 logic elements, 270 Kbits of memory 8-digit seven-segment LCD display 8 position DIP switch VGA output PS/2 input port (comes in handy to try out keyboard processing) buzzer a couple of push buttons a handful of IO pins, some of which can be used as a connector for a 1602/12864 display and 22 miscell... | ||
