Explore >> Select a destination
|
You are here 
|
www.janwagemakers.be | ||
| | | | |
paperstack.com
|
|
| | | | | Write-only blogging | |
| | | | |
ananthakumaran.in
|
|
| | | | | ||
| | | | |
willhaley.com
|
|
| | | | | After following DigitalOcean's guide for upgrading to Ubuntu Xenial I hit a snag. DNS was broken. I do not see this as a fault of DigitalOcean, but more likely an issue with Ubuntu. Update: 2017-06-27 As U?ur Çetin mentions in the comments below, there is a simpler fix for this. Find the IP address of your mirror and create an /etc/hosts entry for it. Then simply run apt upgrade. Done! Once resolvconf is working properly again, you should be able to comment out or remove the /etc/hosts entry you created for the mirror. | |
| | | | |
blog.nuculabs.de
|
|
| | | Hi ?? The purpose of this article is to get you started quickly with a Home Assistant on a Raspberry Pi. It's a simple walkthrough on how to install Home Assistant and configure it so it will boot with your PI. I will use my old Raspberry PI V3 board. Flashing the Raspberry PI OS You will need a microSD card of reasonable size, I'm using a 16GB one and a USB Adapter to connect it with my PC. | ||
