/explore
|
You are here 
|
karlherrick.com | ||
| | | | |
blog.nuculabs.de
|
|
| | | | | Hi In this article we'll test out the PMS5003 sensor in order to see if it works. I've forgot to buy a connector board, so we will do a manual connection to the Raspberry Pi 3 B V2. This involves cutting the wires and adding some resistors. Please note that you need: 5 Jumper Wires 2 Resistors 10K Ohm Raspberry Pi Setup Before connecting the sensor to the Pi we need to configure the Pi for this usecase. | |
| | | | |
guy.carpenter.id.au
|
|
| | | | | [AI summary] The author describes creating a simple analog bandwidth meter using an Arduino, stepper motors, and custom wiring to gather live network data. | |
| | | | |
babaawesam.com
|
|
| | | | | Here I go, I quote it againEven with the best of camera hardware, we are still slave to its features. Thanks to the raspberry pi camera, we will make a camera do whatever our heart desires. Recently my friend got a kayak and we have been going out into the sea and the only thing | |
| | | | |
mikecoats.com
|
|
| | | For around £20 you can buy a development board with an Arm Cortex M4 and some peripherals including an accelerometer, microphone, DAC, and USB OTG port. This documents my attempt to get a rust toolchain installed, connect the debugger and confirm it can see the ARM chip, ready for programming. | ||
