Explore >> Select a destination
|
You are here 
|
ripitapart.com | ||
| | | | |
iosoft.blog
|
|
| | | | | Analog signal capture at 60 megasamples per second This project provides a simple way of capturing data using a Pi PicoW, and displaying it wirelessly on a Web browser, as either as a logic analyser, or an oscilloscope. The digital capture is done using the Pico I/O lines; the analogue capture uses an AD9226 parallel... | |
| | | | |
blog.brixit.nl
|
|
| | | | | Reverse engineering the BMD HDMI camera control protocol by splicing a logic analyzer in an HDMI cable. | |
| | | | |
ciesie.com
|
|
| | | | | If you have ever worked with ARM Cortex M processors you've probably used GDB + OpenOCD combo for debugging. If you didn't: OpenOCD connects to the processor via a STLink programmer and opens a socket to which GDB can connect. It will push data necessary for debugging (and understandable for GDB) through this socket. That means that if you connect GDB to this socket (so called remote debugging) you can debug processor's software like any other application on your PC. | |
| | | | |
mcukits.com
|
|
| | | |||
