/explore
|
You are here 
|
willempennings.nl | ||
| | | | |
incoherency.co.uk
|
|
| | | | | [AI summary] The user has detailed a comprehensive project involving the creation of a front panel for an RC2014 computer. This includes assembling the front panel with switches and LEDs, connecting it to the logic PCB, and addressing various technical challenges such as bank switching, LED polarity, and power supply considerations. The user also discusses the use of a custom program to demonstrate the front panel's functionality, the planning for future enhancements like a sound card and networking via the serial port, and reflections on the learning experience and potential future improvements. | |
| | | | |
smayze.com
|
|
| | | | | The purpose of this entry is to describe the assembly, programming and testing of the alternate Clock Display Module - whereby instead of a dedicated display driver chip, the module will be controlled by its own micro controller. This was created under a separate GitHub branch as UCtl_small. After the relative ease of getting the... | |
| | | | |
gregdavill.com
|
|
| | | | | A tennis ball sized, 20 sided, LED clad, regular polyhedron Introduction The major challenge of making a smaller LED cube in my opinion is the LED panels. Commercially available panels are designed for video walls and typically made at 64x64 pixel as a minimum size. This seems to be a good trade off between cost/complexity/light efficiency. On my previous project mini-led-cube I had overcome one of the major hurdles of creating a smaller cube, because I had designed and built my own custom high density* ... | |
| | | | |
www.krekr.nl
|
|
| | | |||
