/explore
|
You are here 
|
blog.vasi.li | ||
| | | | |
blog.nuculabs.de
Hi The purpose of this article is to get you started quickly with a Home Assistant on a Raspberry Pi. It's a simple walkthrough on how to install Home Assistant and configure it so it will boot with your PI. I will use my old Raspberry PI V3 board. Flashing the Raspberry PI OS You will need a microSD card of reasonable size, I'm using a 16GB one and a USB Adapter to connect it with my PC. |
|
| | | | | ||
| | | | |
kaspars.net
Aqara G2H (ZNSXJ12LM) is a really nice Zigbee hub and indoor camera with official HomeKit support. Of course it runs Linux so people have discovered ways to connect it to Home Assistant which exposes most of your HomeKit devices to Home Assistant over MQTT without impacting the original Apple Home and Aqara app integrations. Aqara... |
|
| | | | | ||
| | | | |
blog.brixit.nl
I've noticed a squirrel occasionally coming through the garden and I wanted to capture it. |
|
| | | | | ||
| | | | |
chipnetics.com
The 'Bus Pirate' is a universal bus interface that talks to most chips from a PC serial terminal, eliminating a ton of early prototyping effort when working with new or unknown chips. It supports many protocols such as SPI, JTAG, 1-Wire, and of course I²C. This tutorial focuses on I²C communications. |
|
| | | |||
