/explore

Click through on any links that interest you or select the planets on the right to continue exploring the Outer Web.
You are here

 macoy.me
Bare metal graphics on Raspberry Pi 4
| | edwinmichielsen.nl
Grafana Stability Raspberry Pi 3B+ issues - Ed's Playground
3.5 parsecs away

Travel
| | [AI summary] A user reports stability issues with the Grafana stack on a Raspberry Pi 3B+ and suspects the SD card is the cause, while a comment questions the software setup on the same drive.
| | moritzhamann.com
Switching to 5Ghz wifi made the Raspberry Pi fly again
3.4 parsecs away

Travel
| | Preventing lackluster wifi speeds on a Raspberry Pi 4
| | makezine.jp
Make: Japan | 800?Raspberry Pi?
2.5 parsecs away

Travel
| |
| | blog.nuculabs.de
PMS5003 Particulate Matter Sensor Test Run | NucuLabs
18.2 parsecs away

Travel
| Hi In this article we'll test out the PMS5003 sensor in order to see if it works. I've forgot to buy a connector board, so we will do a manual connection to the Raspberry Pi 3 B V2. This involves cutting the wires and adding some resistors. Please note that you need: 5 Jumper Wires 2 Resistors 10K Ohm Raspberry Pi Setup Before connecting the sensor to the Pi we need to configure the Pi for this usecase.