Explore >> Select a destination
|
You are here 
|
lapinozz.github.io | ||
| | | | |
incoherency.co.uk
|
|
| | | | | [AI summary] The author describes building an Arduino-based rev limiter for a mower to prevent engine damage by electronically limiting RPM. | |
| | | | |
www.circusscientist.com
|
|
| | | | | What you will need for the project: ESP12e dev board: Aliexpress: http://s.click.aliexpress.com/e/EOP1yvis - ESP8266 development board, with battery pack and pre-soldered headers. This one comes with RGB LED, and even a light sensor. Buy two if you like! This project can easily be adapted for any ESP8266 board, such as my favorite D1 Mini. I ... Continue reading "WiFi controlled Christmas Light Window Decoration" | |
| | | | |
ryhl.io
|
|
| | | | | I've chosen to make a PCB that simulates the game of life on a 5 by 5 LED grid, and can be remote controlled with Bluetooth. Here is a video of the finished product: | |
| | | | |
whatibroke.com
|
|
| | | Hi everyone, Just a quick post on how to configure wireless info on a raspberry pi. To start with, open the config file: sudo nano /etc/wpa_supplicant/wpa_supplicant.conf You can then add any number of connections to the file with varying priorities: ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=netdev update_config=1 country=AU network={ ssid="Mobile Network" psk="YOUR_PASSWORD" key_mgmt=WPA-PSK priority=2 } network={ ssid="Home Network" psk="YOUR_PASSWORD"... | ||
