/explore
|
You are here 
|
www.righto.com | ||
| | | | |
acidbourbon.wordpress.com
Video Appetizer https://youtu.be/XsFSDM1pgMA TLDR I built a shortwave radio receiver from scratch using only cheap and easily available components, i.e. standard transistors, op-amps and 74xx logic chips. No typical radio parts - no coils, no variable capacitors, no exotic diodes. This project is easy to build and gives you a hands-on experience with radio technology... |
|
| | | | | ||
| | | | |
blog.gremblor.com
[AI summary] The author details the design and build of a custom, budget-friendly programmable current source using discrete components and a microcontroller to overcome the limitations of expensive commercial Source-Measure Units. |
|
| | | | | ||
| | | | |
nothinguntoward.eu
[AI summary] This is a detailed account of the design and implementation of a trailing edge dimmer circuit for a lamp. The author explored various components and concepts, including current sources, pulse generation, and the challenges of achieving a linear ramp for dimming. Despite the project's complexity, the author found the dimming performance to be less than ideal due to nonlinearity in the ramp and flicker in the output. The project concluded with a decision to pursue an alternative solution, such as a rotary switch, instead of a dimmer. |
|
| | | | | ||
| | | | |
diyelectromusic.com
After getting the Arduino and SP0256A-AL2 working I wondered if I could repeat the trick from the Arduino and AY-3-8910 and have the Arduino generate the required clock signal for the SP0256A-AL2. This post starts to look at that question. https://makertube.net/w/paGX4eiCAHgLU9mK2x3uyq Warning! I strongly recommend using old or second hand equipment for your experiments. I... |
|
| | | |||
